A word of alerting in advance, if you have a wallpaper removal task ahead of you are in for a bit of work. Ensure you set aside a considerable quantity of time for this project as you may run into tough spots and problem areas that will eat up a lot of time. Eliminating wallpaper however, while not an enjoyable task, can be done quickly and quickly if you are prepared.
Get the room ready. Eliminate whatever from the space that can be removed. This includes furniture and rugs where possible. When the space is cleared cover the flooring with a ground cloth in the area you will be working. This will help in cleanup later.
Now get all of your tools together:
- Goggles
- Mask
- Perforator
- Bucket
- Sponge
- Glue Dissolving Agent
- Blunt Scraper
- Sharp Scraper
Goggles and a mask are on the list initially for a great reason. You will have little pieces of who knows how old paper with who understand what type of glue on it flying and leaking all over the place. Use the goggles and the mask whenever you are doing the least little work.
I can’t undervalue the value of the perforator. They can be found in a couple styles and sizes. Get the one that is most appropriate to the quantity of paper you need to remove. The perforator is pretty easy to use. With a slight quantity of pressure you roll it around the wall and it makes little divots into the paper. Beware not to press to tough as you do not wish to dig into the wall itself.
Next is preparing your service. The commercial products work well, however Iíve had excellent outcomes with warm water and vinegar. If you are going to use the business items, make sure to follow their directions regarding mix ratios. For the vinegar solution, 1 part vinegar to 4 parts water suffices for a lot of glues. Add more vinegar if you are having difficulties.
Ok, so we are ready to start soaking the walls. Choose an area, not to large, and get it thoroughly damp with your sponge and solution. Some people like to use a sprayer as well, however I find the sponge and a little pressure works much better. Don’t be shy about moistening the wall. Your solution needs to soak through the paper and loosen up the glue. You might need to repeat this step depending upon your situation.
Now comes the scrapping. Utilise a blunt scrapper or even a putty knife to start with. You want to prevent nicking or evaluating the wall below to conserve the difficulty of spackling in the future. Usage slow even strokes to remove the paper. If it is loose enough it will simply melt off the wall. If not, damp it once again. If you continue to have trouble, you might have to change to the sharp scrapper. Be extremely cautious though, of both your fingers and the wall!
As soon as all the paper if off, you might have to duplicate this process to eliminate extra paper layers or perhaps a glue layer that might be left behind. You want to get all the way down to the plaster or drywall. Then, spackle any nicks or holes smooth, clean up the mess and paint to fit. Oh, and praise yourself on a task well done.
Post Sponsored by https://www.tottenhamglass247.co.uk/